New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Eamonn to use an illustration of the Hercus chuck I had converted to fit the Woodfast 1 inch ten. I bought a converter from a dealer with the one inch ten thread got a machinist to cut the thread to fit the chuck. Works wonderfully allowing me to revert back easily to the metal lathe use any time.

Peter.

[QUOTE="Penpal, post: 164900, member: 122"] Eamonn to use an illustration of the Hercus chuck I had converted to fit the Woodfast 1 inch ten. I bought a converter from a dealer with the one inch ten thread got a machinist to cut the thread to fit the chuck. Works wonderfully allowing me to revert back easily to the metal lathe use any time. Peter.:thumbs: [/QUOTE]

Verification