• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Nib width

angelo49

Registered
Joined
Jun 19, 2013
Posts
2,827
Location
Lancaster, PA Brooklyn, NY USA
First Name
Angelo
Someone wants to know what the 'Nib Width' of this Pen is.
I really don't know . It's a ''Traditional Fountain Pen''
Fine? or Medium?
Iridium Point, Germany printed on it. The photos are good on my photo editor
but don't show as good here.
fountain trad BLK walnut2.jpg
Project1.jpg
 

edlea

Lobbygobbler
Registered
Joined
Aug 1, 2013
Posts
4,693
Location
Blackpool
First Name
Ed
It is a far eastern nib and will probably be their version of a western 'medium' but their 'mediums' are somewhat finer placing it somewhere between a western medium/fine. Also although it is stamped 'Germany' it has never been to Germany, this is acceptable! If it said 'Made in Germany' that would be a different matter altogether. A similar case is 'Duke Pens Germany' made in China,never seen Germany, but they do have a registered mail address in Germany and providing they don't use 'Made in Germany' they can use that country's name.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,491
Location
Colebrooke, Devon
First Name
Phil
Nibs are my thing Angelo, and as Ed says, your nib has never been any closer to Germany than Shanghai. (nor has it got an iridium point, by the way). The width of far eastern nibs varies quite a bit, but most commonly they produce a line width a shade over 0.6, which again, as Ed says is somewhere between a European medium and a fine.

In truth though, the only way you can find out for certain is to ink it up and draw some horizontal lines with it on some paper that wont bleed the ink. Then you have to measure the line width. You can't accurately measure the nib point width because the tip is rounded.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,491
Location
Colebrooke, Devon
First Name
Phil

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
It would seem nibology is yet another way to have to investigate when making pens. Quite a science IMHO many thanks again Phil.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top