New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Sorry I just reread your post it was the pulley you moved, not so disastrous but even so the pulleys should line up so the belt is sitting correctly and never need to be moved.
By moving it you may have eased the strain on one bearing and placed it on the other, still not advise I would follow with any regard unless it was clearly out of line.

[QUOTE="Grump, post: 152538, member: 232"] Sorry I just reread your post it was the pulley you moved, not so disastrous but even so the pulleys should line up so the belt is sitting correctly and never need to be moved. By moving it you may have eased the strain on one bearing and placed it on the other, still not advise I would follow with any regard unless it was clearly out of line. [/QUOTE]

Verification