I have not made an Omega before. Most kits are pretty straight forward so I don't use the instructions and can work them out. There is a small O ring in the Omega kit and I a not sure where it goes. I would have referred to the instructions in this case but I don't think there are any.
-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Omega query
- Thread starter Wrongway
- Start date
chas_41_uk
Registered
Robbie the instructions for all Dan's pens are available on his website
Instructions – Taylors Mirfield
Hope this helps
Instructions – Taylors Mirfield
Hope this helps
TaylorsMirfield.co.uk
Registered
Hi, instructions for the omega are on the website http://taylorsmirfield.co.uk/pages/instructions
If it is a small black plastic ring it sounds like wastes from the black plastic insert
If it is a small black plastic ring it sounds like wastes from the black plastic insert
- Joined
- Jan 31, 2013
- Posts
- 9,505
- First Name
- Terry
Thanks for the info didn't know that there were instructions !!!
donwatson
Fellow
+1 What Terry said
wm460
Grand Master
- Joined
- Mar 16, 2013
- Posts
- 23,128
- First Name
- Mark
Problem solved.