• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Orion Pens

Neil

Fellow
Joined
May 21, 2013
Posts
3,137
Location
Hitchin, Hertfordshire
First Name
Neil
Source, Woodturningz.com, available in either Chrome or Gold, Roller and Fountain. Lovely nib, far better than anything else in the mid price range, and in my opinion better than the Vertex nib. Finish either EEE Cream and Shellaxax (Pallisander, London PLane and South African Olive Wood0 or acrylic spray sealer and two coats of CA.



They are from the left, Bog Oak, Elm, Yew, Pallisander, London Plane, Tunisian Olive Wood, Toolpost Tigerwood, Tunisian Olive Wood (Olea europea), South African Olive Wood (Olea latifolia), Judas Wood, Toolpost Tigerwood, Kingwood.
 

Grump

Grand Master
Joined
Aug 17, 2013
Posts
10,510
Location
Stevenage
First Name
Brian
Looks a nice enough pen and you give it a good recommendation Neil.
Better nib than the vertex, some claim mate.
What sort of size are they compared with gent / Jnr gent?
 

Kardav

the PENsioner
Fellow
Joined
Jan 26, 2014
Posts
1,983
Location
Nottingham north
First Name
Dave
A really nice set there Neil, might have to give them a dose of looking at. Did you pay import duty on these from the US?
 

Neil Lawton

Longlocks
Fellow
Joined
Dec 26, 2013
Posts
3,121
Location
York
First Name
Neil
Neil.
Please don't be offended by this, but I am interested to know.
I can't sell a pen around here with this sort of profile, for love or money!
Fat lass with a belt too tight, is the only comment I ever received that is polite enough to put on here!
I know you get around a bit, (and sometimes sell pens!), but does the preference differ from place to place?
Regards,
Neil
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Nice looking set of pens there Neil. Usual high standard as well..

Not sure if it's the photo or the kit, they are all sitting on the left hand side and on there clipss I wonder if it's a problem with the kit?:devil:

Seriously though, I would check that out, could be a clip shy pen you have there otherwise. Sure your customers won't like it.:devil:

[SUP][/SUP]
 

Neil

Fellow
Joined
May 21, 2013
Posts
3,137
Location
Hitchin, Hertfordshire
First Name
Neil
Nice looking set of pens there Neil. Usual high standard as well..

Not sure if it's the photo or the kit, they are all sitting on the left hand side and on there clipss I wonder if it's a problem with the kit?:devil:

Seriously though, I would check that out, could be a clip shy pen you have there otherwise. Sure your customers won't like it.:devil:

[SUP][/SUP]
Eamonn,

You lost me there, the pens wont stay flat with the clips in the air so I laid them all the same way for the photo. Could have done it stood up but the pen stands are all stacked in the van ready for the next show.
 

Neil

Fellow
Joined
May 21, 2013
Posts
3,137
Location
Hitchin, Hertfordshire
First Name
Neil
Neil.
Please don't be offended by this, but I am interested to know.
I can't sell a pen around here with this sort of profile, for love or money!
Fat lass with a belt too tight, is the only comment I ever received that is polite enough to put on here!
I know you get around a bit, (and sometimes sell pens!), but does the preference differ from place to place?
Regards,
Neil

Neil,

You'll have to try a lot harder to offend me!

I started making the JR Gent with a profiled cap and a flat barrel and it was more popular as it was not as clinical and with woods such as zebrano and straight grained rosewoods amongst others, the curve enhanced the beauty of the wood. I continued the practice with this pen but because of the non postable element of the cap/barrel, the straight barrel looked stupid with a profiled cap, hence the slight curve. It is a much nicer pen, i think, as I have turned it, but thats my choice and opinion! But it is without doubt my best seller.

On the issue of what sells where, it is more of what sells when, a good example is that I sell the slimline stylus but with a streamline centreband and at Christmas this flies off the shelf, the belief, I think, is that the elder generation were trying to be thoughtful and buy it for the younger generation Ipad/phone users. Differences that I have noted I am not convinced are down to the area but more likely attributable to the advertising mediums used by the show promoters, for instance the Crafts for Christmas show must have been advertised in SAGA magazine and 2 for one offers on the back of hair dye cartons. I am sure there are Males under 50 in Harrogate, but if there are they didnt show when I was exhibiting!

Fountain Pens outsell Rollerballs pens by at least 5:1, the last consignment of the Orion I bough 35 Fountain Pens and only 5 Rollerballs, I put that experience in context, I will do 53 shows this year, all of which are at least two day shows.
 

paulm

grave manibus faciendum
Registered
Joined
Oct 7, 2013
Posts
12,046
Location
Sandford
First Name
Paul
Thats a lovely set of pens there Neil and finished to youre usual excellent standard, I like those kits an am going to have to get some, especially if you rate them. A nice selection of woods too. :thumbs:
 

Neil Lawton

Longlocks
Fellow
Joined
Dec 26, 2013
Posts
3,121
Location
York
First Name
Neil
Neil,

You'll have to try a lot harder to offend me!

I started making the JR Gent with a profiled cap and a flat barrel and it was more popular as it was not as clinical and with woods such as zebrano and straight grained rosewoods amongst others, the curve enhanced the beauty of the wood. I continued the practice with this pen but because of the non postable element of the cap/barrel, the straight barrel looked stupid with a profiled cap, hence the slight curve. It is a much nicer pen, i think, as I have turned it, but thats my choice and opinion! But it is without doubt my best seller.

On the issue of what sells where, it is more of what sells when, a good example is that I sell the slimline stylus but with a streamline centreband and at Christmas this flies off the shelf, the belief, I think, is that the elder generation were trying to be thoughtful and buy it for the younger generation Ipad/phone users. Differences that I have noted I am not convinced are down to the area but more likely attributable to the advertising mediums used by the show promoters, for instance the Crafts for Christmas show must have been advertised in SAGA magazine and 2 for one offers on the back of hair dye cartons. I am sure there are Males under 50 in Harrogate, but if there are they didnt show when I was exhibiting!

Fountain Pens outsell Rollerballs pens by at least 5:1, the last consignment of the Orion I bough 35 Fountain Pens and only 5 Rollerballs, I put that experience in context, I will do 53 shows this year, all of which are at least two day shows.

Thanks Neil.
In return, I can assure you that any males under 50 in Harrogate, are only there to visit their Grandparents!
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
:bravo:Neil I enjoyed all your pens and looking at mostly timber or other materials suits me more than clips and with so many not able to enumerate. Thankyou for the comparison of the two pens it is obvious the contrast between the two. I admire your tenacity with all those two day shows and locations you would be a veritable encyclopedia in towns, accomodation, eateries a veritable endless cource of knowledge, may you prosper.

Kind regards Peter:thumbs:.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top