New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I like to use Acrylic blanks but on the lighter ones the brass tubes can show through.
I paint the tubes but often I see references to reverse painting the blank. I assume that this means
getting paint into the blank before you glue in the brass tube. If so what is the best way to do this?
It doesn’t take much to confuse me!

[QUOTE="Maurice, post: 36980, member: 183"] I like to use Acrylic blanks but on the lighter ones the brass tubes can show through. I paint the tubes but often I see references to reverse painting the blank. I assume that this means getting paint into the blank before you glue in the brass tube. If so what is the best way to do this? It doesn’t take much to confuse me! :thinks: [/QUOTE]

Verification