• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

The 100 grit is causing the problem, far too coarse. You really shouldn't need to go under 240, depending on your tool finish you could start at 320.


With 100 grit you'll be need a new set of bushes every 3 or 4 pens


Top