New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Our turning club had a one Board Foot challenge. We had to turn something from any wood/s or other material that was no more than a total of one board foot, started as 1" thick material and it could be put together anyway we wanted or used whole but no more than 12" in any direction. I made this decorative plate using Satin Walnut (Red Gum) as the sky and White Oak being the windblown prairie. It is 11 3/4" across so I easily made the 12" rule. Finish is a Tried and True, a food safe linseed oil and wax.

Pete

[ATTACH=full]51920[/ATTACH]

[QUOTE="Curly, post: 369114, member: 2148"] Our turning club had a one Board Foot challenge. We had to turn something from any wood/s or other material that was no more than a total of one board foot, started as 1" thick material and it could be put together anyway we wanted or used whole but no more than 12" in any direction. I made this decorative plate using Satin Walnut (Red Gum) as the sky and White Oak being the windblown prairie. It is 11 3/4" across so I easily made the 12" rule. Finish is a Tried and True, a food safe linseed oil and wax. Pete [ATTACH type="full"]51920[/ATTACH] [/QUOTE]

Verification