• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Problem with Dragon kit tubes

qquake2k

qquake2k

Fellow
Joined
Sep 9, 2015
Posts
1,070
Location
Northern California
First Name
Jim
Has anybody ever run across this problem? The tubes in the PSI Dragon pen kits are too small to fit on the bushings. Either that, or they're all misshapen. I've got two kits, and none of them will fit on the bushings, they're all too tight. I measured the bushings, and they're all the correct diameter. I tried enlarging them slightly with the Dremel, but to no avail. I'm going to contact PSI, but wanted to make sure it wasn't something I've done first.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top