New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I agree with Grump, I would stick it in my wood lathe chuck and spin it up and use a bastard file to square it up. Doesn't need to spin too fast and don't push down too hard, keep a constant pressure.

Otherwise I would put in the metal lathe and square it up. If you don't have one then I sure there is someone around you that will have one.

[QUOTE="silver, post: 229439, member: 165"] I agree with Grump, I would stick it in my wood lathe chuck and spin it up and use a bastard file to square it up. Doesn't need to spin too fast and don't push down too hard, keep a constant pressure. Otherwise I would put in the metal lathe and square it up. If you don't have one then I sure there is someone around you that will have one. [/QUOTE]

Verification