Record Power T Runners

[Jim]

Does anyone know where you can buy the "T" Runners for a Record Power bandsaw from pleaseeeeeeeee ..

 

[Doug]

First vintage shampoo now T runners, what's them then Jim

 

[Doug]

Quick google, are they for in the mitre track? If so I made some last weekend for my spindle moulder simply from small blocks of aluminium with a bolt screwed through them to fix finger boards to the sliding table. Very easy to make.

 

[Jim]

Aye thems em Doug ..

I have made a number of attempts to try making some but i end up with to much movement from side to side on the sliding board ..

 

[Terry]

Does anyone know where you can buy the "T" Runners for a Record Power bandsaw from pleaseeeeeeeee ..

I made mine from oak but I am sure they come in standard sizes. Measure the width and look on Axminster.

 

[Woody]

There you go UJK Technology Universal T-Track - Accessories & Hardware - Routers & Trimmers - Power Tools | Axminster.co.uk

 

[Jim]

Here is an image of what the groove looks like for the track .. it is like an inverted T ..

​

 

[paulm]

I think this is what you want Jim T Nuts, T Bolts | Tee Nuts and Tee Bolts | WDS

 

[Jim]

I think this is what you want Jim T Nuts, T Bolts | Tee Nuts and Tee Bolts | WDS

Now these could be what i am looking for Paul .. Just to get the correct measurements now ..

 

[Doug]

Jim, if you're struggling to get them off the shelf I'll happily make you a couple I'd just need accurate sizes of your mitre slot.

 

[Doug]

Just thought I'd add this as I was using mine today, these are they



There is a double step in them as they are made to fit in the mitre tracks of both the spindle moulder & bandsaw which are slightly different , this is them holding a finger board pushing some 9" Oak against the bandsaw fence whilst deep ripping.

 

[Jim]

Jim, if you're struggling to get them off the shelf I'll happily make you a couple I'd just need accurate sizes of your mitre slot.

Thanks for that Doug, but hopefully now i know i can get the parts that Paul linked to i should be able to make a much better fit runner ..

Just thought I'd add this as I was using mine today, these are they

View attachment 7494

There is a double step in them as they are made to fit in the mitre tracks of both the spindle moulder & bandsaw which are slightly different , this is them holding a finger board pushing some 9" Oak against the bandsaw fence whilst deep ripping.

View attachment 7495

A picture says a thousand words Doug ..

Thanks my friend ..

 

[Grump]

Search ebay for t-slot bolts Jim.
That's how I got mine for my cnc.

 

[Jim]

Thanks for that Brian, i don't know the sizes yet, but saved the search ..