• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Thanks for the helps gents but problem now solved.  :rolling:

After speaking with Glass Cast themselves this morning, turns out the hardener has gone off - faulty & not reacting the way it should.

They are sending me a batch of new resin and hardener.

Turns out I was not the only one with this issue, the hardener literally boils the resin so much it will never harden but does turn it into one very sticky mess.


What looks like the air blasting the resin was actually me trying to get the tubes out.

Its the same pressure pot I have used hundreds of times in the past and nothing wrong with that side of things, it has never happened before and totally threw me as to what the problem could be.


Thanks though :thumbs::thumbs::thumbs::thumbs:


Top