• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Sealing end grain with wax

hawkeyefxr

Full Member
Joined
Jan 8, 2015
Posts
373
Location
Yateley Hants
First Name
ken
I plan to get some wood in to store for future use, i though i would seal the end grain with wax but have no idea where to get it. I am guessing it does not have to be super duper wax just the cheap variety as it will just seal the grain. I have an old pressure cooker i use in the garage so that would be perfect just as a receptacle to warm the wax in.

Ant ideas where i can get this wax, i don't think a couple of candles will do doubt they are even made of real wax these days anyway.

Bit of an update, i'm guessing paraffin was may be best, clear, uncoloured of course.
 

nimrod

Graduate Member
Joined
May 10, 2013
Posts
418
Location
Lancaster
First Name
Robin
Hi Ken the last lot I bought was from the Endless Green Group they do 1/2kg, 1kg and 5kg packs, hope this helps.

Robin
 

Vic Perrin

Moderator
Executive Member
Joined
Feb 23, 2014
Posts
8,215
Location
Rugeley Staffs
First Name
Vic
I have used PVA for sealing end grain for a number of years now with a good success rate. You can get a 5lt container of if for well under a tenner.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
Another one here for watered down PVA as it goes a lot further.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Madame Tussards? Museum for wax however there are many alternatives to use before wax IMHO.'Commercial sealers for me, in a pinch waterbase paint.

Peter.
 

AllenN

Fellow
Joined
May 20, 2013
Posts
2,245
Location
Lancaster, UK
First Name
Allen
Sun? What's that? +1 for PVA. I usually get mine from Wilkinsons. It is certainly easier to apply and seems to work pretty well. I just dilute it with a little water and apply with a brush.
 

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
I have been using Chestnut End Seal that I bought years ago, but after all the other comments, once this is gone i'll save some money & use PVA :thinks:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top