Sedona - interesting discovery...

[bluntchisel]

'Ere, Guys,

I've just found out that if you've inadvertently reversed the grain match when assembling the Sedona kit all is not lost. Simply unscrew the fittings attached to the nib end blank - and reverse them. Then screw the the nib end back onto the cap end and Bingo! The grains will be matching. Another thing - if you want to change your Sedona roller into the fountain pen version simply unscrew the WHOLE nib section - and replace it with the fountain pen nib section. This also works the other way, of course!

Maybe you all knew these little "fiddles" - if this is the case then I'll own up to being a plonker!

Bob.

 

[mattyts]

Same thing with JR Gents too,although the nib end and cap are different lengths so you cant do it if its a part of a set(2 or more)

 

[Grump]

Bob,
Plonker init?

 

[Woody]

I dont thing the J/G are interchangeable from R/B to F/P

 

[Neil]

Same thing with JR Gents too,although the nib end and cap are different lengths so you cant do it if its a part of a set(2 or more)

Matt, the dimensions of the finished pen barrel at the nib end and the other end are slightly different on the Jr Gents.

 

[Neil]

I dont thing the J/G are interchangeable from R/B to F/P

I trust you will reconsider this one Woody!!

 

[Jim]

Every bit helps Bob ..

 

[mattyts]

I dont thing the J/G are interchangeable from R/B to F/P

Just have to remove the RB spring for a FP

 

[billyb_imp]

Well worth knowing