New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I have sanded to 240 and also used a stanley knife to put a few keying lines on and used thin Ca medium and thick, but the thin set to quickly so I now use medium or thick it gives more time to get into the right position, I have also used epoxy, but I find that too messy so I prefer CA.

Peter

[QUOTE="Buckeye, post: 226094, member: 294"] I have sanded to 240 and also used a stanley knife to put a few keying lines on and used thin Ca medium and thick, but the thin set to quickly so I now use medium or thick it gives more time to get into the right position, I have also used epoxy, but I find that too messy so I prefer CA. Peter [/QUOTE]

Verification