New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I've done a couple of pens with celtic bands now which have come out ok, but one thing if it's doable (due to my location) would be great would be instead of a celtic band but to embed the Manx logo - the triskellion/3 legs of man.
[ATTACH]17787[/ATTACH]

Obviously not in that detail, but to get the basic shape exposed when turning, even if it's just on one side of the pen.
Trying to figure out whether this is actually doable, and if it is, what bits I'd need to add in & where to do so/what angles etc.

Think I've probably got my work cut out trying to an elaborate shape like that but you never know......

Cheers guys

[QUOTE="MrJoshua, post: 174511, member: 937"] I've done a couple of pens with celtic bands now which have come out ok, but one thing if it's doable (due to my location) would be great would be instead of a celtic band but to embed the Manx logo - the triskellion/3 legs of man. [ATTACH=CONFIG]17787._xfImport[/ATTACH] Obviously not in that detail, but to get the basic shape exposed when turning, even if it's just on one side of the pen. Trying to figure out whether this is actually doable, and if it is, what bits I'd need to add in & where to do so/what angles etc. Think I've probably got my work cut out trying to an elaborate shape like that but you never know...... Cheers guys [/QUOTE]

Verification