New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Hi All,

Sorry about the incorrect size in the header.

[HTML]http://www.silverpenparts.com/pb/wp_dfdf98a0/wp_dfdf98a0.html[/HTML]

They list it as "This tap fits the current Meister Nib style #5 feed assembly and the Schmidt roller ball conversion feed. Use a "B" drill bit for this tap." implying that there is only one tap.

I've just emailed then regarding the set or no set. I'll post the response.

Cheers

Inky

[QUOTE="InkyFingers, post: 76229, member: 467"] Hi All, Sorry about the incorrect size in the header. [HTML]http://www.silverpenparts.com/pb/wp_dfdf98a0/wp_dfdf98a0.html[/HTML] They list it as "This tap fits the current Meister Nib style #5 feed assembly and the Schmidt roller ball conversion feed. Use a "B" drill bit for this tap." implying that there is only one tap. I've just emailed then regarding the set or no set. I'll post the response. Cheers Inky [/QUOTE]

Verification