• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Yes it is. When you have finished sanding the blank, before you put on the CA then wipe it down with acetone, another thinners or blast it with air. i alway use a loop close up to see if there is anything in the grain, but only because I have not got my former vision.


Peter


Top