thank you all

[Makey11]

Thank you all for your help , with my old lathe but it was 5/8 fitting so pffft , I gave up and got a new one from Axminster ( if any off you went to the newark show it was there on Display )




So very happy :-)
thank all once again

 

[Penpal]

Very brave to set it up above the appliances Tina. Like the lathe.

Peter.

 

[yorkshireman]

Well done Tina, now you've got to turn something to show us. No excuses now!

 

[brody2123]

Glad you got it sorted Tina. Saw this one on their stand. I think our Phillh has got one and he's well impressed with his. Many happy hours to spend turning now eh.

 

[Jim]

Good to see that you are now sorted Tina ..

 

[paulm]

Nice one Tina

 

[Lons]

Nice!
No going back now and you can wash and dry your blanks before you turn them

 

[Bill Mooney]

A nice little lathe Tina. Now enjoy your turning.

 

[billyb_imp]

Great to see you got sorted with the lathe Tina, it should give you many years happy turning but can't see any wood chips / shavings / saw dust

 

[donwatson]

You should get a good result from that machine Tina

 

[Dalboy]

Good looking little lathe should get you started on the right path. Have fun using it Tina

Great to see you got sorted with the lathe Tina, it should give you many years happy turning but can't see any wood chips / shavings / saw dust

My thoughts exactly nice lathe too clean now go and get some shavings all over it

 

[Makey11]

I have moved it now it's on a work bench was just so excited I had to take a pic the second it was home !!! Right next to my lathe I keep a vacuum cleaner so it never gets to bad ( there as to be a joke in there somewhere)
Happy Easter

 

[Dalboy]

I have moved it now it's on a work bench was just so excited I had to take a pic the second it was home !!! Right next to my lathe I keep a vacuum cleaner so it never gets to bad ( there as to be a joke in there somewhere)
Happy Easter

No joke from me as both of my lathe looks just like it did when I brought it vac all around after going over with a soft bristle brush then have a old curtain covering it when not in use

 

[Penpal]

That makes me happy been watching vids lately every time the lathe gets a nudge it wobbles good luck doing fine detail on them. These days I have no need for a monster lathe set on a one ton block of concrete I do note with interest the switching on the right hand end a lot less susceptable over there IMHO great thinking by the makers problems easier sloved away from the swinging end much safer as well.

Peter.