• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

This part of the blank can now be put to one side.


Mark the next blank for the depth of the brass at the primer end.  Turn this back to the brass tube to go through the hole and then mark the length of the end all together.


Top