• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Hi Tim, most kits are the same to strip down, but just to be sure what kits were they. To strip down the cap then put in a relevant sized Transfer punch and engage it with the edge of the cap insert and gently tap, move it to the opposite side and again gently tap, if you haven't superglued them in then it will start to give and will pop out the top. Then take a transfer punch that will just fit in the tube and tap out the centre band and thread.


Peter


Top