TV/Vanity stool in progress

[martin.pearson]

More experimenting today, this time it's furniture lol, still working on the legs but the seat seems to be going ok, This will hopefully be a TV stool for my granddaughter when its finished. Once the 3D model has been machined the centre is filled with Epoxy resin to bring it flush, found out my bench isn't as level as I thought lol.

Doubt you will see to many of these, apparently Rocking Horse Stools are very rare

Sorry try as I might I wasn't able to get my feet on the CNC machine or the workbench.

 

[Penpal]

Feet firmly on the ground for this one Martin,I have never seen this design on a stool before,totally impressed.

Peter.

 

[alan morrison]

Very impressed Martin. You have a lot of detail in your rocking horse.
Hopefully you will post the finished article.
Alan

 

[Doug]

Following with interest, very impressive

Doubt you will see to many of these, apparently Rocking Horse Stools are very rare

.

 

[martin.pearson]

Thanks, but don't hold your breath waiting, having a bit of a problem with the legs, mainly the joint betewwn the seat & the leg. Did this from plans I bought from a guy in America, that joint is actually a 3D component & because I have made changes to the size of the seat & the part of that joint in the seat I now have to do the same with the legs. Changing the joint in the seat was easy but not going to be as easy for the legs. Something I didn't think to much about when I started.

For those that are interested this is the sttol complete & the joint I am talking about, pictures are from the instructions I got with the plans.

 

[Les ELm]

Very nice.

Les

 

[wm460]

Very nicely done.

 

[Penpal]

Very special from here.New look.

Peter.

 

[fortress]

Great work Martin, well done Sir.

 

[Paul hd]

Classy looking joint.