New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

When I assembled the pens at the weekend I checked each mechanism before fitting and every one was stiff. A very small squirt of PTFE sprayed down the centre solved the problem instantly so unless anyone can give a reason not to do so, I'll treat each one before fitting in future.

Bob

[QUOTE="Lons, post: 47716, member: 361"] When I assembled the pens at the weekend I checked each mechanism before fitting and every one was stiff. A very small squirt of PTFE sprayed down the centre solved the problem instantly so unless anyone can give a reason not to do so, I'll treat each one before fitting in future. Bob [/QUOTE]

Verification