New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

If you mean what material used for the castings then its Clear Polyester Resin, i find this gives much less air bubbles than the General Purpose Resins that are available.

Regarding the second question, yes it certainly does, i have found this out the hard way. I bought one of these from ebay to help with the procedure of my castings.

[ATTACH]154[/ATTACH]

Hope this helps ...

[QUOTE="Jim, post: 1612, member: 1"] If you mean what material used for the castings then its Clear Polyester Resin, i find this gives much less air bubbles than the General Purpose Resins that are available. :bwink: Regarding the second question, yes it certainly does, i have found this out the hard way. I bought one of these from ebay to help with the procedure of my castings. :thumbs: [ATTACH]154._xfImport[/ATTACH] Hope this helps ... [/QUOTE]

Verification