New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

It looks to me a perfume pen ;you turn same as pen but when putting together"the long fibre piece is wick and gets sealed in the longest part BEFORE end capping .the small piece fits the end and the lid and end are screw assembly the top is capped. To use unscrew and there should be plastic syphon thing. Use this to syphon perfume put into wick after removing end (the small white piece) .then ready and the perfume is drawn up the wick . Use as required. The o ring is seal on screw section . Hope this helps.....

[QUOTE="Karatekid, post: 207192, member: 1177"] It looks to me a perfume pen ;you turn same as pen but when putting together"the long fibre piece is wick and gets sealed in the longest part BEFORE end capping .the small piece fits the end and the lid and end are screw assembly the top is capped. To use unscrew and there should be plastic syphon thing. Use this to syphon perfume put into wick after removing end (the small white piece) .then ready and the perfume is drawn up the wick . Use as required. The o ring is seal on screw section . Hope this helps..... [/QUOTE]

Verification