New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Hi Don

Apart from the couple of sample packs of all the colours I have as a fitter, (those are only 100 mm square), I have offcuts left of only 3 of the kitchens I've fitted and that's one of them which without checking I'm sure is "biscuit".

400g is the normal finish on a kitchen worktop application but I've done a couple to 600g and on pens I go to 4000 micromesh and then chrome polish which gives a mirror shine.

[QUOTE="Lons, post: 163223, member: 361"] Hi Don Apart from the couple of sample packs of all the colours I have as a fitter, (those are only 100 mm square), I have offcuts left of only 3 of the kitchens I've fitted and that's one of them which without checking I'm sure is "biscuit". 400g is the normal finish on a kitchen worktop application but I've done a couple to 600g and on pens I go to 4000 micromesh and then chrome polish which gives a mirror shine. [/QUOTE]

Verification