• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

1.  Sharp bits are critical.  Forstner bits can be 'tuned up' using a diamond hone in mere seconds.

2.  Lube is helpful.  Brendan Stemp is a commercial pepper mill and flute maker in Australia whose work involves drilling lots of deep holes.  He favors using linseed oil as a lubricant.    Obviously, this is not a good idea if you intend eventually to glue something into hole.


Top