• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

I’ve had mixed results using. Ca is so I use melamine or acrylic lacquer as a finish using Phil Dart’s method.

Before you assemble your pens always run a small round file inside the ends of the brass tubes to remove any burrs from the inside of the tubes.


Top