New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Still trying the Craft coat Neil , i put it on same way as ca , leaving a minute in between coats, at the moment getting good results , tend to put on 7 - 10 coats , leave for 24 hours and polish using something like a t cut , if it has ripples then micromesh first.
Have had a few niggles but trial and error at the moment, i like it , takes a little longer but the finish is good and cuts out any nasty fumes.

[QUOTE="johnny5, post: 191391, member: 284"] Still trying the Craft coat Neil , i put it on same way as ca , leaving a minute in between coats, at the moment getting good results , tend to put on 7 - 10 coats , leave for 24 hours and polish using something like a t cut , if it has ripples then micromesh first. Have had a few niggles but trial and error at the moment, i like it , takes a little longer but the finish is good and cuts out any nasty fumes. [/QUOTE]

Verification