New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

In my opinion Tom is should not be a problem provided you use the thick Ca, if you use the thin then you might want to use a 9mm drill and see how it fits prior to gluing.

The main problem you will encounter using 23/64 and thin ca glue is a possible break out due to there not being enough glue between tube and blank. (Voids so to speak)

Hope this helps..
With the epoxy and painted tunes they need a little more room inside.

[QUOTE="silver, post: 122667, member: 165"] In my opinion Tom is should not be a problem provided you use the thick Ca, if you use the thin then you might want to use a 9mm drill and see how it fits prior to gluing. The main problem you will encounter using 23/64 and thin ca glue is a possible break out due to there not being enough glue between tube and blank. (Voids so to speak) Hope this helps.. With the epoxy and painted tunes they need a little more room inside. [/QUOTE]

Verification