• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

cast

  1. edlea

    Tupperware casting moulds.

    Can I use Tupperwear type boxes to cast PE resin ?
  2. scouseroy

    another Resin and Pinecone bowl

    cast in a block using an old cake tin and turned on the lathe. Made from Polyester resin, mica powders and pinecones cast in several layers over a few days
  3. TK woodman

    hand cast tiger skin streamline

    Not posted for a while so here's a streamline cast over ten days using gede crystal resin
  4. J

    2nd casting that sort of worked

    Hey everyone This is my second what i class as sucsessfull casting lol I had mixed way too much black for my first cast so i decided to smash it up and try a black and pearl gold. Now here is the problem, when im lathing it down the cutting tool is skipping the black bits and leaving them...
  5. J

    my first ever casting

    Hey all first post here and my first ever casting using polyester resin this was a test buy to see if I would like doing it and even though my second pour I left too long to mix the colors I am chuffed and am going to order some more resin and mica colors it's a steep learning curve but so...
  6. Gizmo3k

    My first cast

    Please excuse the picture quality, didn't have time to get the light box out. This is my first attempt at casting, using waterclear Products and metallic mica powders. It was poured into a bit of pvc pipe, and came out with a little persuasion! This will be my first delta once it is done...
  7. fortress

    My first blank cast.

    Using water clear Polyester resin I cast My first blanks, then turned My first self cast Omega fountain pen, I'm pleased with the outcome.
  8. BradG

    A closed end kitless fountain pen, with an etched & cast lid.

    I turned the pen body with quite a significant taper, and then ribbed it with light cuts spaced 2mm apart. For the lid, I turned it to size and threaded, then etched to depth great enough to hold Polyester Resin. The piece was then cast, and turned back down to dimension - with a lot of...
  9. Bammer

    How I make the name Pens

    ok, since I have been asked I'll tell you how I do it. By no means is this original I'm sure but who cares, I thought this up myself ... but it must have been done before. 1, decorate the tube, these are all Zeta's, I use nail polish and or spray paint. I also have a daughter who is in the...
Top