-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
A little bulk batching
- Thread starter flexi
- Start date
Morse
Graduate Member
That looks like fun Mark.
See you are timing yourself too, or is that to remind not to be late for your dinner?
Dave
See you are timing yourself too, or is that to remind not to be late for your dinner?
Dave
Gadget-UK
Fellow
MI5 and Anti-Terrorist squad - expect to raid Mark's Man Cave any day now 
That's only two boxes....I have buckets full!!MI5 and Anti-Terrorist squad - expect to raid Mark's Man Cave any day now
Busy busy.
Adal6
Graduate Member
Hello Mark
can you buy the bullet tips to make the nib, or do you make them yourself
can you buy the bullet tips to make the nib, or do you make them yourself
I buy the tips from my local gun shop, I drill the back and remove the lead with a tourch/ heat, then put them in a collet chuck on my lathe and drill a 2mm hole in the tip (again I go from the back, it self centers, otherwise you have to file a flat on the tip)
Once done I use a cartridge reloading press to swage the tip in the case.
Once done I use a cartridge reloading press to swage the tip in the case.
25 deleaded in about 15mins...but they stay hot a while after!
