• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Long distance wood collection

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
Well this is the first of my latest acquisition of wood to boost the pile.

The wife came in two weeks ago telling me there is a notice up on a lamp post lest than 100feet around the corner stating that the road will be closed during the day for 2 weeks while trees are cut down. Anyway Monday the workmen started lopping the tops and getting all of the smaller pieces off ready for the trucks to be cut down.
A gentle walk around the corner and a chat to the man in charge and the outcome was that today the first of many pieces ended up in my garden.
This is Ash and there is Oak and Field maple to follow. So I will add photo's as it arrives.
Here is today's small pieces as this is off one tree with the main trunk still to be felled.
As you can see I have made a start on preparing them since the photo the ends have been sealed except the larger lump in the car which is now sitting on the patio ready for the chain saw.

First two pics. These two pieces hopefully show the nice piece of flame and could make a very interesing couple of bowls

Third pic. The little piece bottom left is 9" square to give an idea of size

Forth pic. A straight piece of grain

Last two pics. The lump still to be carved up the small branch coming off of the main trunk is about 9" diameter. So the rest of the trunk below this will give some nice sized bowls or hollow forms
 

Attachments

  • DSCF8785 (1024x768).jpg
    DSCF8785 (1024x768).jpg
    75.8 KB · Views: 78
  • DSCF8786 (1024x768).jpg
    DSCF8786 (1024x768).jpg
    66.5 KB · Views: 78
  • DSCF8787 (1024x768).jpg
    DSCF8787 (1024x768).jpg
    64.6 KB · Views: 79
  • DSCF8788 (1024x768).jpg
    DSCF8788 (1024x768).jpg
    56.7 KB · Views: 80
  • DSCF8790 (1024x768).jpg
    DSCF8790 (1024x768).jpg
    72.8 KB · Views: 81
  • DSCF8792 (1024x768).jpg
    DSCF8792 (1024x768).jpg
    62.3 KB · Views: 81

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Excitement there aplenty Derek wow factor in the high range mate, your wife deserves a box of chocolates mate.

Peter.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
Excitement there aplenty Derek wow factor in the high range mate, your wife deserves a box of chocolates mate.

Peter.

She does now after helping me in with the large piece in the car it was heavy as it is very wet luckily I have a sack truck to aid moving bits like this. I will attack that one with the chainsaw tomorrow
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
I will be adding to this as the wood comes in as this is not the last of it. I can stand in the workshop and hear them sawing which is better than any music on a radio. Will hopefully chop the big lump today to see what is inside hopefully some more flame at the branch junction.
I will be cutting and sealing as the wood comes in then when time allows may even rough turn some pieces to aid quicker drying
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
The first two pictures are the large lump from yesterdays haul now cut in half they measure 21" X 18" did not see how thick.

The last three pictures are oftoday's haulWell another load this time Oak the slabs are 18" square for size so if nice tomorrow more cutting and sealing there is still more Oak to come as well other woods
 

Attachments

  • DSCF8793 (1024x768).jpg
    DSCF8793 (1024x768).jpg
    96.3 KB · Views: 22
  • DSCF8809 (1024x768).jpg
    DSCF8809 (1024x768).jpg
    68.6 KB · Views: 22
  • DSCF8808 (1024x768).jpg
    DSCF8808 (1024x768).jpg
    72.1 KB · Views: 21
  • DSCF8794 (1024x768).jpg
    DSCF8794 (1024x768).jpg
    92.1 KB · Views: 22
  • DSCF8801 (1024x768).jpg
    DSCF8801 (1024x768).jpg
    86.1 KB · Views: 22

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
Having not had the privilege of getting freshly sawn wood until recently, I wonder how long it needs to dry? Are we talking months or years for large pieces like the one in the car boot?
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
Having not had the privilege of getting freshly sawn wood until recently, I wonder how long it needs to dry? Are we talking months or years for large pieces like the one in the car boot?

On a average it take 1 year for every 1" thickness but increases once you get to 4" thick. To get around the problem I rough turn some of my blanks to allow them to dry quicker but sealing the outside not only does it dry quicker but it tends to move rather than split, but that is still no guarantee you may still get splitting but less likely.

Nice grain in that bit.:thumbs:
BTW you show us your shed it must be very crowded now with all that wood.:funny:

Some older pics Mark of one wood shed. It is much fuller than that before this last lot of wood and there is another one with more logs ready to be cut and other pieces already rough cut. I must get around to getting them properly dimensioned for turning.
 

Attachments

  • DSCF7242 (768x1024).jpg
    DSCF7242 (768x1024).jpg
    66.7 KB · Views: 17
  • DSCF7244 (1024x768).jpg
    DSCF7244 (1024x768).jpg
    53.6 KB · Views: 17
  • DSCF7241 (960x1280).jpg
    DSCF7241 (960x1280).jpg
    69.7 KB · Views: 17
  • DSCF7246 (1024x768).jpg
    DSCF7246 (1024x768).jpg
    52.8 KB · Views: 17
  • DSCF7249 (1280x960).jpg
    DSCF7249 (1280x960).jpg
    50.3 KB · Views: 17
  • DSCF7250 (1280x960).jpg
    DSCF7250 (1280x960).jpg
    50.9 KB · Views: 17
  • DSCF7254 (1280x960).jpg
    DSCF7254 (1280x960).jpg
    55 KB · Views: 17
  • DSCF7253 (1280x960).jpg
    DSCF7253 (1280x960).jpg
    62 KB · Views: 17

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
The pile grows

Because of the rain yesterday I never got the wood cut ready for the next lot to arrive. So a knock on the door and the guys chopping down the trees had brought another load around so had to pile it on the Oak.
This lot is Ash and there is still more to come. All of this will be piled up and burnt if I had not taken the opportunity to ask for it.
There are some great pieces which will produce some lovely feather effect when turned. As can be seen in one of the photo's some of it is 16" diameter. Today before they arrived I modified my cutting horse so that I could cut most of this. Hopefully will get some of it cut tomorrow and sealed.
Shame the great grandson is not here tomorrow as he will be great for painting the ends he is only 4 but enjoys doing that and makes a good job as well
 

Attachments

  • DSCF8814 (1024x768).jpg
    DSCF8814 (1024x768).jpg
    87.3 KB · Views: 16
  • DSCF8815 (1024x768).jpg
    DSCF8815 (1024x768).jpg
    73.3 KB · Views: 16
  • DSCF8817 (1024x768).jpg
    DSCF8817 (1024x768).jpg
    90.7 KB · Views: 16
  • DSCF8818 (1024x768).jpg
    DSCF8818 (1024x768).jpg
    95.9 KB · Views: 16

wm460

Grand Master
Joined
Mar 16, 2013
Posts
23,113
Location
Tennant Creek, Northern Territory, Australia.
First Name
Mark
Some older pics Mark of one wood shed. It is much fuller than that before this last lot of wood and there is another one with more logs ready to be cut and other pieces already rough cut. I must get around to getting them properly dimensioned for turning.

Your just too organised Derek, :goesred: plus you must have a bigger yard than me.:sob:
 

hawkeyefxr

Full Member
Joined
Jan 8, 2015
Posts
373
Location
Yateley Hants
First Name
ken
She does now after helping me in with the large piece in the car it was heavy as it is very wet luckily I have a sack truck to aid moving bits like this. I will attack that one with the chainsaw tomorrow

Reminds me of me and my wife. 10.30 at night at the bottom of Box Hill carrying a huge log, 12 inch plus diameter and about 6ft long. Made the car sit down.
Next time I'm in Edenbridge I will keep a look out for cut trees lol.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top