alpha1
Fellow
I have ordered a couple of ER 20 collet holders of the bay as well as quite a bit of tooling. This looks like turning into another expensive hobby. Don't tell the wife. I think I am going to need a bigger shed.
-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
What equipment do i need to start making pens
These are the last ones I used.
C16-ER20M-100L Straight Collet Chuck CNC Milling Lathe Extension Rod 702105960011 | eBay
The hole through the shaft is only 10mm though so I opened it up to 13mm with a glass drill as the steel is quite hard. It’s slow going but I’ve done this with 3 or 4 chucks so far. The 13mm glass drill is not quite long enough to go all the way through though so I made an extension for it.
C16-ER20M-100L Straight Collet Chuck CNC Milling Lathe Extension Rod 702105960011 | eBay
The hole through the shaft is only 10mm though so I opened it up to 13mm with a glass drill as the steel is quite hard. It’s slow going but I’ve done this with 3 or 4 chucks so far. The 13mm glass drill is not quite long enough to go all the way through though so I made an extension for it.
wm460
Grand Master
- Joined
- Mar 16, 2013
- Posts
- 23,113
- First Name
- Mark
Very nicely made tools William.
alpha1
Fellow
Thanks for all the replies.