There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
THis is my first effort in wood colouring so I thought I would aim for something simple. I bought a 12 x 2 blank from Axminster. It sat in the workshop for weeks before I could start it.
When I finally started it I attached the face plate but again had to put it to one side as time was limited...
Had another play...
The metal leaf is from flakes I made from sheets of Gold,copper and silver metal leaf...
The question is which should be the front and which the back...?
Kevin:banana:
Nice piece of Ash, turned a few weeks ago, finished with oil. Diameter is 195mm, 30mm internal depth. Split runs through to the back and is just visible in the bottom of the bowl. Must have been a very stressed tree!
As always, C&C please.
Thanks,
Chriscb
Not sure if you noticed but I have been absent from the forum for a few
days.
What happened is that week before last I did not feel too good and
thought it would blow over as many of these bugs seem to come and go
which kept me out of the workshop. Anyway, last week still not feeling very
well...
Glad to have my lathe back up and running, it seems strange as I knew by the sound how it was behaving but now the motor is so quiet.
Started out with a very uninteresting piece of wood and was going to use black stain to enhance the grain that is there but did not get the desired effect so went...
Whilst I was banned woodworking etc following a heart op I spent many hours flat on my back surfing the net and you tube and decided that once I got back in the workshop I would have a go at bandsaw boxes. (Also I was getting bored with pens … Heresy I know). So in order of learning and many...
Well got informed last night that the seller (whose house we were buying) has decided to accept a MUCH higher offer and has now rejected our :vangry::vangry:
I think the term is “Gazumped” :sob:
Took us 2 years to find a place that ticked all the boxes and suitable for the wife (due to illness)...
I spent a couple of hours in the shed on Christmas Eve and made myself an Inertia sander. I bought the head from Simon Hope a while back and had already made a straight handle for it. I then saw an angled version on the net I liked so thought I’d make one.
A while back I made a pen from rare timber for a friend in exchange for Cephalotus plant and an Orchid. The guy asked me to make three more pens,loved my circuit board one I had shown him a picture of. His father and two brothers are IT Specialists. So this one in upgrade Gold with two more...
Every now and again I get to cut across the grain with this timber. Every piece I have is eaten down the centre by Termites. Way back it became a very favourite timber to seek out and use. Happy with this one.
Peter.:thumbs:
Just getting over my recent Knee replacement and thought it was time to get back in the workshop.
A Roman Harvest in New Guinea Rosewood Burr (Golden Amboyna)
Yet more wood having a great month for collecting. I think I am becoming a wood hoarder.
I went out today and looked at the yew log I mentioned the other day which is 12foot but only came back with this pile. I can hear you all saying well what happened to the log well that one and a shorter...
Sorry I've not been around on the forums guys. Family emergency happened so been helping out with my grandchildren. Will be back soon now things have settled down. Hope everyone is ok.
Keith
Ive had my first customer message me with a problem with their pen and I have made and sold many - its a TM Kappa and it appears the threaded piece which is press fitted into the brass tube into which the section threads has come out of the brass tube.
Has anyone else had this happen? Should I...
Well it's been a while since I've been in the garage, what with the leaking roof that was only recently resolved by the landlady and other things getting in the way.
I think said landlady felt a bit bad at how long it's take to repair the roof and allow me to get back in there, it was dripping...
Hello to all,
It has been along time since I am absent in the forum because of health. Indeed, since January I have of to undergo 2 operations what obliged me the inactivity during several weeks. I soon hope to have finished with it so that I can take back my activities in the workshop.
Hoping...
I turned my lathe on for the first time in a looooooong time, the spindle move about 1/8 of a turn and stopped.
Checked the plug was in properly, the inverter showed it was doing 2300 rpm's, fight my way through the dust and cobwebs and open the door where the motor is, the belt was off...