bowl

Well you have seen the WIP on this bowl and now for the finished bowl which measures 13" X 8 1/2" and 3 1/2" tall.When the finish has hardened I will give it a wax

I have just started to make a salad bowl, its made up of three types of wood, Ash, Oak (i think) and a dark wood which i do not have any idea as to what it is. I have glues these together using a mix of Titebond wood glue and Gorilla glue. It has really gone off well. I have noticed that the two...

Found a spare lump of wood which I think is ash yesterday and spun a small bowl.

Walnut bowl approximately 11" sealed and buffed. This was from a trunk that I got last year and rough turned which means I was able to complete turning sooner rather than later

Another Turkey Oak crotch piece. The staples are Copper nails beaten with a ball hammer. The bowl section is 5 1/4" x 3 1/4", finished in Danish oil.

I was turning a piece of Rowan that has a fair amount of rot in it, it also has some small cracks as well. I 'treated' the rot and cracks to three sessions of CA and left it to go off. While it was mounted on the chuck screw and only the outside finished, it ran true. I swapped it round and held...

I don't know whether to classify this as a bowl or a hollow form.

My first piece of proper turning for a while I spent just under an hour in there and it was cool enough to go into the shed this morning so decided to turn one of my London Plane blanks that I have the finished bowl is 8 3/4" X 1 3/4"

...Chestnut bowl (5 1/2" x 2")

I had some bits of timber left over from making our dining room table, so i cut and glued them up for a bowl. It seemed ok but now i'm not sure if it's a bowler hat or a piddle pot. It's mahogany and oak ( i think) Don't know why the pictures they came out that way as the originals are not...

A Salad bowl 12inches x 2inches two shades of Idigbo and spliced with Sapeie fiished 400 grit and mineral oil

A piece of Wych Elm gifted to me by John Hodgson in Scotland. The bowl section is 3 1/2" Diameter x 2" high.

This thing is HUGE, i want to see the sideboard that it sits on lol Stuart Mortimer - YouTube

I have been given a bowl by a friend who's uncle had started turning it and then sadly passed away so Ive been asked if I can finish it. Problem is Im not sure how best to remount it on the lathe? The bowl is mahogany (heavy) and is approx 12" diameter. There has been a shallow recess cut in...

I have a chuck with 'std' jaws that cover a range from about 42mm to 60mm. My lathe swings 6 inches making a 12 diameter bowl in theory. My question is are my jaws man enough to hand on to a bowl that size. I have one on the go at the moment and it's around 10 inches diameter and about 4 1/2...

Following on from the resin bowl here is first go at resin fly clock

My second attempt at fly in resin bowl quite pleased with this one no bubbles

I was wondering what the consensus is on micro waving wood here. I have only been turning a short while as you know, so i don't have a store of wood air drying for a few years like i know some of you have. I have bought some wood but that seems to be cheating to me not to mention the cost at...

Hi all My latest efforts at colouring a bowl - I'm not sure if it looks like stone, rust or just a mess!! CC welcome! video here: Spirit Stain Multi-Colour 1 - YouTube

Hi all Had fun today making a sycamore bowl and then texturing and colouring the rim... Video can be seen here... Textured Blue Sycamore Bowl - YouTube